BFT Stoppy B 700 Electro-Mechanical Automatic Bollard

Our Price:  £1,600.00
List Price:  £2,400.00
Saving Of:  £800.00 (33%)
(Exc. 20% VAT)(£1,920.00 Inc. VAT)

BFT STOPPY B 700 Automatic Bollards:  
BFT Perseo CBE Bollard Controller:  
BFT Mitto B Two Channel Transmitters:  
Procon LD100 Safety Loop Detector & Base:  
Loop Detector Cable:  
BFT Traffic LED Light Red / Green:  

Delivery:  No charge




Part Number:  BFT/STOPPYB/700

BFT STOPPY B 700 Electro-mechanical automatic bollard with a height above ground of 700mm, cylinder diameter of 200mm, speed of 9 seconds and a break in resistance of 60,000 J.

Value for money and quality, these are the roots for the BFT Stoppy B automatic bollards.  The results of careful market survey looking into the assembly techniques and design details that led to the production of a simple bollard that responds to customer needs without neglecting the quality requirements that have always marked BFT products and all at a competitive price. 

The BFT STOPPY B 700 automatic bollard features a LED light crown, reflective strip and 10 metres of multi-core cable as standard.


  • Electro-mechanical automatic bollard
  • Cylinder diameter 200mm
  • Bollard height above ground 700mm
  • Cast iron capped top light crown with 6 radial LEDs
  • Steel FE 360 6mm thick (steel version)
  • Powder coated RAL 7015 slate grey (steel version)
  • AISI 304 (1.4301) (stainless steel version)
  • Protection level IP67
  • Fitted with 10m multi core cable
  • Working cycles 500 per day
  • Speed 9 seconds
  • Fully assembled and pre-wired
  • Easy and ready to install
  • Power supply 230Vac 50Hz
  • Motor power 130W
  • Operating temperature -20°C ÷ 60°C
  • Impact resistance 6,000 joules
  • Break in proof 60,000 joules
  • Different colours available at additional cost (steel version)

Purchasing Information:

1. Please select the amount of bollards from the drop down menu.

2. The BFT range of bollards require a specific controller, please select from the drop down menu if required.

(NB. One controller can run up to 4 bollards together simultaneously, therefore one separate entrance and exit would require two controllers).

3. We recommend transmitters for access control, please select the amount from the drop down menu if required.

4. For safety we recommend loop detectors, usually one loop detector per separate entrance or exit, please select from the drop down if required.

5. Loops detectors require specific loop cable in the ground, 100 metres is usually good enough for 3 or 4 small / medium loops, please select if required.

6. Additional safety we recommend traffic lights, usually one traffic light per separate entrance or exit, please select from the drop down if required.


Please contact our sales team for a written quotation and bulk orders for:
BFT Stoppy B 700 Electro-Mechanical Automatic Bollard

Telephone: 01793 422010 or Sales Mobile: 07717 745047

Full Name: *
Company Name:
Contact Number: *
Site Postcode: *
E-Mail Address: *
Existing Customer:  *
Subject: *
Message: *
Please add the two numbers

New Bollards Direct